Sliver Cans
  • Home
  • Products
  • Sliver Cans
services

HDPE PUJACANS With Accessories

PUJACANES: and all the above components are designed, Material Selected and Manufactured in All size and deameters Following also specification.

Castor wheels of fluff proof design patented by the company are the integral parts of pure state-of-the artcans.

The can body is made of a special blen of polymers- HDPE with plasticizer polymer blends for making the butt weld perfect and stress free.

The butt welding is performed in a numerically controlled welding machine specially designed and also the weld area diffusion at the joint.

Thus, a seamless barrel is made and joints are tested for impact resistance. The side seams of our cans have never failed at the joint even after several years if intensive use in spinning.

Spring with Pantograph and Plastic Top (uptp 24"Dia) or GI Top (28"to40"Dia)

Spring for higher load and diameter of laid-on-sliver are fitted with pantograph. A triangular buttom is required for the free movement of the pantograph, so that the spring collapses uniformly.

The buttom of the pantograph is especially designed to accommodate the collapsed convoluteds which ensure uniform movement of sliver, not allowing any tilting of the top plate.

services

Box type spring assembled with plastic bottom cover and steel triagless and alsho plastic top cover specially designed with right thicknes to ensure no deformation.

services

Spring are the heart of spinning cans. It is made of high carbon spring steel wirw. They are hear treat treated to ensure fatigure-free performance, uniform collapsibillity and realease, these are the quility spring of PUJACANS for fitment in modern spinning machines.

Plastic bottom covers are so designed that they allow clustering of coils of the spring withing themselves. This allow additional capicity for thee sliver to fill in.

Galvanized Iron Bottom Plate of 9" to 40" dia can

Gi bottom plate & top cover made on heavy duty power press with special ribs & contours for additioal strength & durability.

services

Single wheel castor & ball bearing castor wheel

specially developed 100% fluff free caster made from Dd quality sheet with Zz bearring for extra protection. Available in 60mm to 80mm Dia.

services
services

Stainless Steel Top Ring

services

Plastic top cover and bottom cover of 9" to 24" Dia cans

Galvanized Iron botton ring

German Technology But Welding Machine

Can Dimensions

Spring Force (5%) 16 18 20 24 32 36 40 Inches
400 450 500 600 800 900 1000 mm
36 42 48 42 45 48 42 45 48 42 45 48 40 48 42 45 48 42 45 48 Inches
900 1070 1200 1070 1143 1200 1070 1143 1200 1070 1143 1200 1000 1200 1070 1143 1200 1070 1143 1200 mm
Cobed Cotton 11.50 13.50 16.50 19.00 20.00 21.00 22.00 24.00 24.50 31.00 34.00 36.00                 kg.
Cotton & Viscose (Rayon) 8.00 9.50 11.00 13.50 14.50 16.00 17.00 18.50 19.50 25.00 27.00 28.00 32.00 39.00 39.00 43.00 45.00 42.00 45.00 54.00 kg.
Blend 7.00 9.00 10.00 9.50 10.50 11.00 15.00 16.50 17.00 23.00 24.00 25.00                 kg.
Synthetic 5.00 7.50 8.50 8.50 9.00 9.50 13.00 13.50 14.50 20.00 21.00 21.00 25.00 28.00 31.50 33.00 34.00 34.00 7.00 38.00 kg.
Initial Load 0.45 0.45 0.45 0.56 0.56 0.56 0.60 0.60 0.60 0.815 0.815 0.815 1.50 1.50 1.75 1.75 1.75 2.00 2.00 2.00 kg.

Can Dimensions

Dia D D1 h2 h3
10 272 254    
12 323 305    
14 374 356    
16 424 406 8,25,50 65,83
18 475 457 8,25,50 83
20 526 508 8,25,50 83
24 630 610 8,25,50,70 83,105
28 724 700 50,70 105
30 774 750 50,70 105
32 828 800 50,70 105
36 928 900 50,70 105
40 1020 1000 50,70 105

Caster Specifications

Diameter 50 60 80 mm
Height 65 83 105 mm
Load 60 70 90 kg

Can Height

Inch 36 42 45 48 50
mm 914 1067 1143 1220 1270